参考文献
［1］ PARIYANI A，SEIDER W D，OKTEM U G，et al.Incidents investigation and dynamic analysis of large alarm databases in chemical plants：A fluidized-catalytic-cracking unit case study［J］.Industrial&Engineering Chemistry Research，2010，49:8062-8079.
［2］ BUNCEFIELD MAJOR INCIDENT INVESTIGATION BOARD.The final report of the Major Incident Investigation board［R/OL］.Buncefield Major Incident Investigation Board，2008［2020-12-21］.https://www.icheme.org/media/13923/buncefield-miib-final-report-volume-2a.pdf.
［3］ 国务院山东省青岛市“11.22”中石化东黄输油管道泄漏爆炸特别重大事故调查组.山东省青岛市“11.2”中石化东黄输油管道泄漏爆炸特别重大事故调查报告［R/OL］.国家安全生产监督管理总局，2013［2020-12-21］.http://www.mem.gov.cn/gk/sgcc/tbzdsgdcbg/2013/201306/t20130626 245228.shtml.
［4］ US NUCLEAR REGULATORY COMMISSION.Advanced alarm systems：revision of guidance and its technical basis:NUREG/CR-61056684［S］.US Nuclear Regulatory Commission，2000.
［5］ ENGINEERING EQUIPMENT AND MATERIALS USERS'ASSOCIATION.Alarm systems:a guide to design，management and procurement:EEMUA-191［S］.Engineering Equipment and Materials Users'Association,2013.
［6］ STANDARDIZATION ASSOCIATION FOR MEASUREMENT AND CONTROL IN CHEMICAL INDUSTRIES.Alarm management:NAMURNA-102［S］.Standardization Association for Measurement and Control in Chemical Industries，2008.
［7］ THE ELECTRIC POWER RESEARCH INSTITUTE.Advanced control room alarm system：requirements and implementation guidance:EPRI-1010076［S］.The Electric Power Research Institute，2005.
［8］ ABNORMAL SITUATION MANAGEMENT CONSORTIUM.ASM consortium guideline：effective alarm management practice［S］.Abnormal Situation Management Consortium，2005.
［9］ INTERNATIONAL SOCIETY OF AUTOMATION.Management of alarm systems for the process industries:ANSI/ISA-18.2［S］.International Society of Automation，2015.
［10］ AMERICAN PETROLEUM INSTITUTE.Pipeline SCADA alarm management:API-1167［S］.American Petroleum Institute，2019.
［11］INTERNATIONAL ELECTROTECHNICAL COMMISSION.Management of alarm systems for the process industries:IEC-68682［S］.International Electrotechnical Commission，2014.
［12］ ROTHENBERG D H.Alarm management for process control［M］.New York：Momentum Press,2009.
［13］ HEALTH AND SAFETY EXECUTIVE.The explosion and fires at the Texaco Refinery，Milford Haven，24 July 1994：a report of the investigation by the Health and Safety Executive into the explosion and fires on the Pembroke Cracking Company Plant at the Texaco Refinery，Milford Haven on 24 July 1994［M］.London：Health and Safety Executive，1997.
［14］ NIMMO I.Rescue your plant from alarm overload［J］.Chemical Processing，2005，28-33.
［15］ BRANSBY M L，JENKINSON J.The management of alarm systems［M］.Sheffield：Health and Safety Executive，1998.
［16］ HOLLIFIELD B，HABIBI E.The alarm management handbook［M］.2nd ed.Houston：PAS，2010.
［17］ KIM I S.Computerized systems for online management of failures：a state-of-the-art discussion of alarm systems and diagnostic systems applied in the nuclear industry［J］.Reliability Engineering and System Safety，1994，44:279-295.
［18］ 杨帆，萧德云.智能报警管理若干研究问题［J］.计算机与应用化学，2011，28:1485-1491.
［19］ WANG J D，YANG F，CHEN T W，et al.An overview of industrial alarm systems：main causes for alarm overloading，research status，and open problems［J］.IEEE Transactions on Automation Science and Engineering，2016，13:1045-1061.
［20］ 朱群雄，高慧慧，徐圆.工业过程报警管理研究进展［J］.自动化学报，2017，43:955-968.
［21］ KIRSCHEN D S，WOLLENBERG B F.Intelligent alarm processing in power systems［J］.Proceedings of the IEEE，1992，80:663-672.
［22］ GOEL P，DATTA A，MANNAN M S.Industrial alarm systems：challenges and opportunities［J］.Journal of Loss Prevention in Process Industries，2017，50:23-36.
［23］ 顾详柏，朱群雄，耿志强.现代化工流程报警系统分析及管理策略［J］.化工进展，2004,23:1348-1352.
［24］ ZHU Q X，GENG Z Q.A new fuzzy clustering-ranking algorithm and its application in process alarm management［J］.Chinese Journal of Chemical Engineering，2005，13:477-483.
［25］ GENG Z Q，ZHU Q X，Gu X B.A fuzzy clustering-ranking algorithm and its application for alarm operating optimization in chemical processing［J］.Process Safety Progress，2005，24:66-75.
［26］ 耿志强，朱群雄，顾祥柏.现代化工流程报警系统优化算法及应用［J］.计算机与应用化学，2005，22:183-188.
［27］ 许圆，朱群雄.基于物元分析的过程工业报警优化［J］.化工学报，2008，59:1609-1614.
［28］ JANG G，SUH S，KIM S，et al.A proactive alarm reduction method and its human factors validation test for a main control room for SMART［J］.Annals of Nuclear Energy，2013，51:125-134.
［29］ KORDIC S，LAM C P，XIAO J，et al.Using event-intervals to analyze alarm sequences in a chemical plant［J］.Journal of Frontiers of Computer Science and Technology，2009，3:267-281.
［30］ NODA M，HIGUCHI F，TAKAI T，et al.Event correlation analysis for alarm system rationalization［J］.Asia-Pacific Journal of Chemical Engineering，2011，6:497-50.
［31］ YANG F，SHAH S L，XIAO D，et al.Improved correlation analysis and visualization of industrial alarm data［J］.ISA Transactions，2012，51:499-506.
［32］ YANG Z J，WANG J D，CHEN T W.Detection of correlated alarms based on similarity coefficients of binary data［J］.IEEE Transactions on Automation Science and Engineering，2013,10:1014-1025.
［33］ AHMED K，IZADI I，CHEN T W，et al.Similarity analysis of industrial alarm flood data［J］.IEEE Transactions Automation Science and Engineering，2013，10:452-457.
［34］ CHENG Y，IZADI I，CHEN T W.Pattern matching of alarm flood sequences by a modified Smith-Waterman algorithm［J］.Chemical Engineering Research and Design，2013，91:1085-1094.
［35］ HU W K，WANG J D，CHEN T W.A local alignment approach to similarity analysis of industrial alarm flood sequences［J］.Control Engineering Practice，2016，55:13-25.
［36］ LAI S Q，CHEN T W.A method for pattern mining in multiple alarm flood sequences［J］.Chemical Engineering Research and Design，2017，117:831-839.
［37］ HAMAGUCHI T，SAKASHITA H，MORITANI H，et al.Method for designing alarm system using DAEs，CE matrices，and preference indices［J］.Journal of Chemical Engineering of Japan，2017,50:439-444.
［38］ HU W K，CHEN T W，SHAH S L.Detection of frequent alarm patterns in industrial alarm floods using itemset mining methods［J］.IEEE Transactions on Industrial Electronics，2018，65:7290-7300.
［39］ SHANG J，CHEN T W.Early classification of alarm floods via exponentially attenuated component analysis［J］.IEEE Transactions on Industrial Electronics，2020，67:8702-8712.
［40］ KONDAVEETI S R，IZADI I，SHAH S L，et al.Graphical tools for routine assessment of industrial alarm systems［J］.Computers and Chemical Engineering，2012，46:39-47.
［41］ PENG D，GU X，XU Y B，et al.Integrating probabilistic signed digraph and reliability analysis for alarm signal optimization in chemical plant［J］.Journal of Loss Prevention in the Process Industries，2015，33:279-288.
［42］ WANG J，LI H G，HUANG J W，et al.A data similarity based analysis to consequential alarms of industrial processes［J］.Journal of Loss Prevention in the Process Industries，2015，35:29-34.
［43］ Hu W K，Wang J D，Chen T W.A new method to detect and quantify correlated alarms with occurrence delays［J］.Computers and Chemical Engineering，2015，80:189-198.
［44］ VENKIDASALAPATHY J A，MANNAN M S，KRAVARIS C.A quantitative approach for optimal alarm identification［J］.Journal of Loss Prevention in the Process Industries，2018，55:213-222.
［45］ YAN L，LIU X，NODA M，et al.Systematic design approach for plant alarm systems［J］.Journal of Chemical Engineering of Japan，2007，40:765-772.
［46］ CHANG Y，KHANA F，AHMED S.A risk-based approach to design warning system for processing facilities［J］.Process Safety and Environmental Protection，2011，89:310-316.
［47］ ARIFIN B M S，CHOUDHURY M.An alternative approach of risk analysis for multivariable alarm system［J］.Journal of Chemical Engineering，2011，26:75-79.
［48］ BRISTOL E H.Improved process control alarm operation［J］.ISA Transactions，2001，40:191-205.
［49］ BROOKS R，THORPE R，WILSON J.A new method for defining and managing process alarms and for correcting process operation when an alarm occurs［J］.Journal of Hazardous Materials,2004，115:169-174.
［50］ BEEBE D，FERRER S，LOGEROT D.The connection of peak alarm rates to plant incidents and what you can do to minimize［J］.Process Safety Progress，2013，32:72-77.
［51］ ZHU J F，SHU Y D，ZHAO J S，et al.A dynamic alarm management strategy for chemical process transitions［J］.Journal of Loss Prevention in the Process Industries，2014，30:207-218.
［52］ ZANG H，LI H G.Optimization of process alarm thresholds：a multidimensional kernel density estimation approach［J］.Process Safety Progress，2014，33:292-298.
［53］ BURR T，HAMADA M S，HOWELL J，et al.Estimating alarm thresholds for process monitoring data under different assumptions about the data generating mechanism［J］.Science and Technology of Nuclear Installations，2013，36:72-90.
［54］ TIAN W D，ZHANG G X，LIANG H T.Alarm clustering analysis and ACO based multi-variable alarms thresholds optimization in chemical processes［J］.Process Safety and Environmental Protection,2018，113:132-140.
［55］ HAN L，GAO H H，XU Y，et al.Combining FAP，MAP and correlation analysis for multivariate alarm thresholds optimization in industrial process［J］.Journal of Loss Prevention in the Process Industries，2016，40:471-478.
［56］ GAO H H，LIU F F，ZHU Q X.A correlation consistency based multivariate alarm thresholds optimization approach［J］.ISA Transactions，2016，65:37-43.
［57］ KIM Y，KIM S B.Optimal false alarm controlled support vector data description for multivariate process monitoring［J］.Journal of Process Control，2018，65:1-14.
［58］ YU C，WANG H Z，YAO J X，et al.A dynamic alarm threshold setting method for photovoltaic array and its application［J］.Renewable Energy，2020，158:13-22.
［59］TOSHKOVA D，ASHER M，HUTCHINSON P.Automatic alarm setup using extreme value theory［J］.Mechanical Systems and Signal Processing，2020，139:106417-106431.
［60］ YU Y，WANG J D，YANG Z J.Design of alarm trippoints for univariate analog process variables based on alarm probability plots［J］.IEEE Transactions on Industrial Electronics，2017，64:6496-6505.
［61］ YU Y，ZHU D，WANG J D，et al.Abnormal data detection for multivariate alarm systems based on correlation directions［J］.Journal of Loss Prevention in the Process Industries，2017，45:43-55.
［62］ YU Y，WANG J D，OUYANG Z J.Designing dynamic alarm limits and adjusting manipulated variables for multivariate systems［J］.IEEE Transactions on Industrial Electronics，2020，67:2314-2325.
［63］ YU Y，WANG J D.Alarm monitoring for multivariate processes based on a convex-hull normal operating zone［J］.IEEE Transactions on Control Systems Technology，2019，28:1-8.
［64］ YUKI Y.Alarm system optimization for increasing operations productivity［J］.ISA Transactions,2002，41:383-387.
［65］ NAGHOOSI E，IZADI I，CHEN T W.Estimation of alarm chattering［J］.Journal of Process Control,2011，21：1243-1249.
［66］ KONDAVEETI S R，IZADI I，SHAH S L，et al.Quantification of alarm chatter based on run length distributions［J］.Chemical Engineering Research and Design，2013，91:2550-2558.
［67］ WANG J D，CHEN T W.An online method for detection and reduction of chattering alarms due to oscillation［J］.Computers and Chemical Engineering，2013，54:140-150.
［68］ YAMANAKA F，NISHIYA T.Application of the intelligent alarm system for the plant operation［J］.Computers and Chemical Engineering，1997，21:625-630.
［69］ AHNLUND J，BERGQUIST T，SPAANENBURG L.Rule-based reduction of alarm signals in industrial control［J］.Journal of Intelligent and Fuzzy Systems，2003，14:73-84.
［70］ SRINIVASAN R，LIU J，LIM KW，et al.Intelligent alarm management in a petroleum refinery［J］.Hydrocarbon Processing，2004，11:47-52.
［71］ ADNAN N A，IZADI I，CHEN T.On expected detection delays for alarm systems with deadbands and delay-timers［J］.Journal of Process Control，2011，21:1318-1331.
［72］ XU J W，WANG J D，IZADI I，et al.Performance assessment and design for univariate alarm systems based on FAR，MAR and AAD［J］.IEEE Transactions on Automation Science and Engineering,2012，9:296-307.
［73］ ADNAN N A，CHENG Y，IZADI I，et al.Study of generalized delay timers in alarm configuration［J］.Journal of Process Control，2013，23:382-395.
［74］ TULSYAN A，ALROWAIE F，GOPALUNI B.Design and assessment of delay timer alarm systems for nonlinear chemical processes［J］.AIChE Journal，2018，64:77-90.
［75］ TAHERI-KALANI J，LATIF-SHABGAHI G，ALVARI-SHOOREDELI M.On the use of penalty approach for design and analysis of univariate alarm systems［J］.Journal of Process Control，2018,69:103-113.
［76］ 宋晓静，徐晓滨，文成林.一种基于证据理论的工业报警器设计方法［J］.杭州电子科技大学学报，2011，31:135-138.
［77］ 刘恒，刘振娟，李宏光.基于数据驱动的化工过程参数报警阈值优化［J］.化工学报，2012,63:2733-2738.
［78］ 赵劲松，朱剑锋.基于数据过滤的化工过程重复报警处理策略［J］.清华大学学报，2012,52:77-281.
［79］ CHENG Y，IZADI I，CHEN T W.Optimal alarm signal processing：Filter design and performance analysis［J］.IEEE Transactions on Automation Science and Engineering，2013，10:446-451.
［80］ CAI Z S，ZHANG L B，HU J Q，et al.Comprehensive alarm information processing technology with application in petrochemical plant［J］.Journal of Loss Prevention in the Process Industries,2015，38:101-113.
［81］ XU X B，LI S B，SONG X J，et al.The optimal design of industrial alarm systems based on evidence theory［J］.Control Engineering Practice，2016，46:142-156.
［82］ TAN W，SUN Y K，AZAD I I，et al.Design of univariate alarm systems via rank order filters［J］.Control Engineering Practice，2017，59:55-63.
［83］ LI W，PENG M J，WANG Q Z.False alarm reducing in PCA method for sensor fault detection in a nuclear power plant［J］.Annals of Nuclear Energy，2018，118:131-139.
［84］ HENNINGSEN A，KEMMERER J P.Intelligent alarm handling in cement plants［J］.IEEE Industry Applications Magazine，1995，1:1-15.
［85］ AFZAL M S，CHEN T W，BANDEHKHODA A，et al.Analysis and design of time-deadbands for univariate alarm systems［J］.Control Engineering Practice，2018，71:96-107.
［86］ WANG Z，BAI X Z，WANG J D，et al.Indexing and designing deadbands for industrial alarm signals［J］.IEEE Transactions on Industrial Electronics，2019，66:8093-8103.
［87］WANG J D，CHEN T.An online method to remove chattering and repeating alarms based on alarm durations and intervals［J］.Computers and Chemical Engineering，2014，67(4):43-52.
［88］ SU J J，GUO C，ZANG H，et al.A multi-setpoint delay-timer alarming strategy for industrial alarm monitoring［J］.Journal of Loss Prevention in the Process Industries，2018，54:1-9.
［89］ CHARBONNIER S，BOUCHAIR N，GAYET P.A weighted dissimilarity index to isolate faults during alarm floods［J］.Control Engineering Practice，2015，45:110-122.
［90］ CHARBONNIER S，BOUCHAIR N，GAYET P.Fault template extraction to assist operators during industrial alarm floods［J］.Engineering Applications of Artificial Intelligence，2016，50:32-44.
［91］ WANG J，LI H G，HUANG J W，et al.Association rules mining based analysis of consequential alarm sequences in chemical processes［J］.Journal of Loss Prevention in the Process Industries,2016，41:178-185.
［92］ DORGO G，ABONYI J.Sequence mining based alarm suppression［J］.IEEE Access，2018,6:15365-15379.
［93］ HU W K，CHEN T W，SHAH S L.Discovering association rules of mode-dependent alarms from alarm and event logs［J］.IEEE Transactions on Control Systems Technology，2017，99:1-13.
［94］ LI D W，HU J H，WANG H，et al.A distributed parallel alarm management strategy for alarm reduction in chemical plants［J］.Journal of Process Control，2015，34:117-125.
［95］ HU W K，WANG J D，CHEN T W.A local alignment approach to similarity analysis of industrial alarm flood sequences［J］.Control Engineering Practice，2016，55:13-25.
［96］ GUO C，HU W K，LAI S Q，et al.An accelerated alignment method for analyzing time sequences of industrial alarm floods［J］.Journal of Process Control，2017，57:102-115.
［97］ WANG J D，YANG Z J，CHEN K，et al.Practices of detecting and removing nuisance alarms for alarm overloading in thermal power plants［J］.Control Engineering Practice，2017，67:21-30.
［98］ SUN Y K，TANW，Chen T W.A method to remove chattering alarms using median filters［J］.ISA Transactions，2018，73:201-207.
［99］ MANNANI Z，IZADI I，GHADIRI N.Preprocessing of alarm data for data mining［J］.Industrial and Engineering Chemistry Research，2019，58:11261-11274.
［100］ YANG F，DUAN P，SHAH S L，et al.Capturing connectivity and causality in complex industrial processes［J］.SpringerBriefs in Applied Sciences and Technology，2014.
［101］ YANG F，XIAO D Y，SHAH S L.Signed directed graph-based hierarchical modelling and fault propagation analysis for large-scale systems［J］.IET Control Theory and Applications，2013,7:537-550.
［102］ DAHLSTRAND F.Consequence analysis theory for alarm analysis［J］.Knowledge-Based Systems,2002，15:27-36.
［103］ YIM S，ANANTHAKUMAR H，BENABBAS L，et al.Using process topology in plant-wide control loop performance assessment［J］.Computers and Chemical Engineering，2006，31:86-99.
［104］ SCHLEBURG M，CHRISTIANSEN L，THORNHILL N F，et al.A combined analysis of plant connectivity and alarm logs to reduce the number of alerts in an automation system［J］.Journal of Process Control，2013，23:839-851.
［105］ GAO H H，XU Y，ZHU Q X.Spatial interpretive structural model identification and AHP-based multimodule fusion for alarm root-cause diagnosis in chemical processes［J］.Industrial and Engineering Chemistry Research，2016，55:3641-3658.
［106］ BAUER M，THORNHILL N F.A practical method for identifying the propagation path of plantwide disturbances［J］.Journal of Process Control，2008，18:707-719.
［107］胡瑾秋，蔡爽，张来斌.基于多尺度建模的炼油化工过程报警根源分析［J］.石油学报（石油加工），2018，34(2）:341-335.
［108］ YUAN T，QIN S J.Root cause diagnosis of plant-wide oscillations using Granger causality［J］.Journal of Process Control，2014，24:450-459.
［109］ BAUER M，COX J，CAVENESS M，et al.Finding the direction of disturbance propagation in a chemical process using transfer entropy［J］.IEEE Transactions on Control Systems Technology,2007，15:12-21.
［110］ DUAN P，YANG F，CHEN T W，et al.Direct causality detection via the transfer entropy approach［J］.IEEE Transactions on Control Systems Technology，2013，21:2052-2066.
［111］ DUAN P，YANG F，SHAH S L，et al.Transfer zero-entropy and its application for capturing cause and effect relationship between variables［J］.IEEE Transactions on Control Systems Technology,2015，23:855-867.
［112］ HUWK,WANG J D，CHEN T D，et al.Cause-effect analysis of industrial alarm variables using transfer entropies［J］.Control Engineering Practice，2017，64:205-214.
［113］ HU J Q，YI Y.A two-level intelligent alarm management framework for process safety［J］.Safety Science，2016，82:432-444.
［114］ WANG J D，YANG Z J，SU J J，et al.Root-cause analysis of occurring alarms in thermal power plants based on Bayesian networks［J］.International Journal of Electrical Power and Energy Systems，2018，103:67-74.
［115］ CHEN K，WANG J D.Normal and abnormal data segmentation based on variational directions and clustering algorithms［J］.Industrial and Engineering Chemistry Research，2017，56:7799-7813.
［116］ CHEN K，WANG J D.Design of multivariate alarm systems based on online calculation of variational directions［J］.Chemical Engineering Research and Design，2017，122:11-21.
［117］ CHEN K,WANG J D.Finding significant qualitative trend combinations for multivariate systems from historical data［J］.Industrial and Engineering Chemistry Research，2019，58:4518-4533.
［118］杨帆，范牛军，叶昊.PDC方法在化工过程变量间因果关系分析中的应用［J］.清华大学学报（自然科学版），2013，53:210-214.
［119］ XU S C，ADHITYA A，SRINIVASAN R.Hybrid model-based framework for alarm anticipation［J］.Industrial and Engineering Chemistry Research，2014，53:5182-5193.
［120］ WANG J D，ZHAO Y，BI Z F.Criteria and algorithms for online and offline detections of industrial alarm floods［J］.IEEE Transactions on Control Systems Technology，2017，99:1-10.
［121］ 张泽生，李宏光，杨博，等.基于置信规则库推理的过程报警预测方法［J］.控制工程，2019,26:765-772.
［122］ ZHU J F，WANG C L，LI C K，et al.Dynamic alarm prediction for critical alarms using a probabilistic model［J］.Chinese Journal of Chemical Engineering，2016，24:881-885.
［123］ LAI S Q，YANG F，CHEN T W.Online pattern matching and prediction of incoming alarm floods［J］.Journal of Process Control，2017，56:69-78.
［124］ XU Y Z，WANG J D，YU Y.Alarm event prediction from historical alarm flood sequences based on Bayesian estimators［J］.IEEE Transactions on Automation Science and Engineering，2020,17:1070-1075.
［125］ CAI S，PALAZOGLU A，ZHANG L B，et al.Process alarm prediction using deep learning and word embedding methods［J］.ISA Transactions，2019，85:274-283.
［126］ DORGO G，ABONYI J.Learning and predicting operation strategies by sequence mining and deep learning［J］.Computers and Chemical Engineering，2019，128:174-187.
［127］ YANG F，XIAO D Y，SHAH S L.Optimal sensor location design for reliable fault detection in presence of false alarms［J］.Sensor，2009，9:8579-8592.
［128］ BLAAUWGEERS E，DUBOIS L，RYCKAERT L.Real-time risk estimation for better situational awareness［J］.IFAC Proceedings Volumes，2013，46:232-239.
［129］ ADNAN N A，CHENG Y，IZADI I，et al.Study of generalized delay-timers in alarm configuration［J］.Journal of Process Control，2013，23:382-395.
［130］ VARGA T，SZEIFERT F，ABONYI J.Detection of safe operating regions：a novel dynamic process simulator based predictive alarm management approach［J］.Industrial and Engineering Chemistry Research，2010，49:658-668.
［131］ XU S，ADHITYA A，SRINIVASAN R.Hybrid mode-based framework for alarm anticipation［J］.Industrial and Engineering Chemistry Research，2014，53:5182-5193.
［132］ CHARBONNIER S，BOUCHAIR N，GAYET P.Fault isolation by comparing alarm lists using a symbolic sequence matching algorithm［J］.IFAC Proceedings Volumes，2014，47:7085-7090.